tencent cloud

Huawei CE Series Switches

下载
聚焦模式
字号
最后更新时间: 2024-11-05 09:46:38
Direct Connect connects Tencent Cloud with the user IDC with a dedicated physical line. After configuring the Direct Connect gateway and dedicated tunnel on the Tencent Cloud side, users need to configure routes on the local IDC. Using the layer-3 sub-interfaces to connect to Tencent Cloud is recommended.
Note:
This document only introduces the local routing configurations associated with Tencent Cloud Direct Connect. For other information, please see the local router documentation or consult your router provider.

Routing Configuration

Note:
It's recommended that you use the default configurations of Keepalive and holdtime for the BGP connection between the two peers. The holdtime is three times the interval at which keepalive messages are sent. The recommended holdtime value is 180s.
# Configure ports
interfaces <interface_number>
description <interface_desc>
undo portswitch
undo shutdown
speed <interface_speed>
duplex full
undo negotiation auto
commit

# Configure virtual tunnels (layer 3 sub-interfaces)
interface <interface_number>.subinterface-number
description <subinterface_desc>
dot1q termination vid <vlanid>
ip address <subinterface_ipaddress> <subinterface_netmask>

# Set eBGP
bgp <as_number>
#router-id <route_id>
peer <bgp_peer_address> as-number <bgp_peer_as_number>
peer <bgp_peer_address> password cipher <bgp_auth_key>
peer <bgp_peer_address> description <bgp_desc>
ipv4-family unicast
peer <bgp_peer_address> enable
commit

# Configure BFD for eBGP
bgp <as_number>
router-id <route_id>
peer <bgp_peer_address> bfd min-tx-interval <time value> min-rx-interval <time value> detect-multiplier <value>


帮助和支持

本页内容是否解决了您的问题?

填写满意度调查问卷,共创更好文档体验。

文档反馈